前言 Preliminary Remarks
首先歡迎使用我廠生產的手提電動封包機。本產品已獲得國家專利授權。
該機具有以下優點：使用安全、 壓緊力可調、自動剪線等特點。
First of all, thanks for your trust and patronize on our product Sewing Machine, which already gains the country patent authorizing. This machine has the advantages as below: operation safety, compression adjusting, cutting off the thread automatic, etc.
目錄 Cataloque
一、技術規格
Technical specification
二、安全注意事項
Notes on operation safety
三、使用方法
Instructions for operation
(1)機針調換
Replacement of the needle
(2)勾針調換
Replacement of the hook
(3)穿線步驟
Steps of threading
(4)壓線盤的調整
Adjustment of thread tension plate
四、產品特點和用途
Product characteristics and usage
五、36V 鋰電池式封包機電池使用注意事項
Precautions for battery use of 36V lithium battery packer
六、調節與維護
Regulation and maintenance
七、機針和勾針正確位置的調整
Adjustment of correct position of the needle and the hook
八、一般故障的處理方法
The treatment methods of general malfunction
九、零件名稱及編號對照示意圖
The sketch maps of the parts name & serial No.
一、技術規格/ Technical specification:
(1)線跡：單線鏈?zhǔn)?101)。 Needlework trace: Single chain line(101).
(2)機針型號：GK9x1、230/26 專用機針。Model of needle: GK9x1、230/26.
(3使用縫線規格:21 支 2x3維綸線。 Thread specifications: 2×3 ply vinylon yar of 21-count .
（縫紉速度：1600~1900針/分。Sewing speed: 1600~1900 needle per minute.
(5)電動機規格：電壓 220 伏、110 伏、36伏，輸入功率200瓦，轉速 10000 轉/分。
Motor specifications: Voltage 220V. 110V. 36V, output 200W. rotating speed 10000г / m.
(外型尺寸：25×8×24（長寬高)。Dimensions(cm x cm x cm): 25Lx 8Wx 24H.
(機器凈重：2.8公斤。Net weight: 2.8kgs.
安全注意事項 / Notes on operation safety:
(使用后維護前拔下電源插頭。
Remove the electric plug before maintaining which after using.
2本機與電源線連接之前確認與電壓相匹配。
Make sure the power source of this machine matches the voltage before connecting.
(3)必須用三芯電源線并確認接地良好。
Must use the three-core power line and make sure the nice ground connecting.
（④電機散熱孔應保持暢通。
Keep open the heat dissipation holes of the motor.
(5)不要用硬物和重力撞擊本機。
sibeon
Don'tcollide with this machine by tough things and brute force.
(0應請經培訓的修理人員對本機進行定期維護。
Should engage the professional for maintenance routine.
(刀不得將本機受潮、及失水以免引起電器短路．
Must not wet and water this machine for avoiding short-circuiting.
三、使用方法/ Instructions for operation:
(1機針調換：將機針升高到高位置，松開緊固螺絲即可，拔出機針，換上新機針，并使機針往上頂住不動為止并注意機針槽朝面板方向緊固螺絲即可。(圖）
(2)鉤針調換：將送料牙升至高點，打開內六角螺絲 B，然后針頭向外傾斜，并往上抽即可。（圖）
（3)穿線步驟。（按圖說明）
(④壓線盛的調整：轉動壓線螺母，順時針為緊，逆時針為松。
()壓緊力的調整：順時針轉動調整螺絲壓緊力增大，逆時針減小，建議在不影響送料效果的前提下適當減小壓緊力，有利為減輕電機負擔和機件磨損。（圖)）
(1)Replacement of the needle: Raise the needle on the highest position, loosen the plusminus screw then use the new one instead of the old, And make the needle hold up and pay attention to fasten the screw in the direction of the needle slot toward the panel. (Picture)
(2)Replacement of the hook: Raise the giving materials teeth on the highest position, loosen socket head screw
B, incline the hook top then up out the hook. (Picture)
(3)Steps of threading. (According to the picture)
