品牌：RETZ瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……進口智能定位器和氣動執行器配套使用。通過接收來自控制系統的4-20mADC電流信號得到閥位控制設定值，同時采集位置傳感器信號得到實際的閥位值，兩者通過控制軟件的計算處理，從而控制氣動執行機構的進氣和排氣，驅動閥位到達設定點retz Intelligent locator and pneumatic actuator are used together. By receiving a 4-20mADC current signal from the control system, the valve position control setting value is obtained, while the position sensor signal is collected to obtain the actual valve position value. Both are calculated and processed by the control software to control the intake and exhaust of the pneumatic actuator, driving the valve position to reach the set point
產品詳情 Product details
進口智能定位器采用微處理器和新型壓電閥代替?zhèn)鹘y(tǒng)定位器中的噴嘴、擋板調壓系統來實現對輸出壓力的調節控制。通過CPU運算處理來實現對閥門開度的輸入信號和閥位的反饋信號的控制。壓電閥由于質量小，可以釋放很短的控制脈沖，從而達到很高的定位精度，且壓電閥只有在閥門有偏差并執行調節動作時才耗氣，所以可以實現低耗能的目的。
Dv6300 series intelligent valve positioner adopts microprocessor and new piezoelectric valve to replace the pressure regulating system of nozzle and baffle in the traditional positioner to realize the regulation and control of output pressure. The input signal of valve opening and the feedback signal of valve position are controlled by CPU operation and processing. Due to its small mass, the piezoelectric valve can release a very short control pulse, so as to achieve high positioning accuracy, and the piezoelectric valve only consumes gas when the valve has deviation and utes the adjustment action, so the purpose of low energy consumption can be achieved.
進口智能定位器行程范圍 Travel range
常規型直行程∶10~100mm  Conventional straight stroke: 10~100mm
常規型角行程∶30~100°  Conventional angular stroke: 30~100 °
分體式∶5~25mm Split type: 5~25mm
安裝支架可選∶ 硬連接或軟連接 Mounting bracket optional: hard connection or soft connection
注∶遠傳型行程范圍同常規型一致  Note: the travel range of remote transmission type is consistent with that of conventional type
進口智能定位器主要技術參數
外殼材質 鋁合金
信號輸入 4-20mA DC
最小工作電流 3.8mA
輸入阻抗 120Ω
環境溫度 常規版本:-20°C～+70°C
低溫版本:-40°C～+70°C
T4環境下防爆溫度為+60°C
T6環境下防爆溫度為+40°C
氣源要求 符合ISO8573-1
固體顆粒大小和密度3級
露點3級
含油量3級
抗振動性 0.15mm,10Hz-60Hz,20次循環/軸
20m/s²,60Hz-500Hz,20 次循環/軸
整個控制閥連續運行時的范圍≤20 m/s²,無諧振峰值
氣源壓力 0.14-0.7MPa
流量 進氣
2 bar    4.8Nm³/h
4 bar    8.0 Nm3/h
6 bar    11.2 Nm3/h
排氣(復位)
2 bar    5.9 Nm³/h
4 bar    9.8 Nm3/h
6 bar    13.7Nm³/h
排氣(保位)
2 bar    6.6 Nm³/h
4 bar    11.1 Nm3/h
6 bar    15.6 Nm3/h
穩態耗氣量 ≤0.4 L/min
基本誤差 ≤1.0%
回差 ≤1.0%
電氣接口 M20×1.5
氣動接口 G1/4
重量 2.0 kg
防護等級 IP66
防爆等級 Ex ia IIC T4/T6 Ga
位置反饋模塊
用于位置反饋直流輸出,2線制連接
電流輸出 端子OUT1和OUT2
輸出額定信號范圍 4~20mA,防短路
動態范圍 3.8~20.5mA
外部負載Rg[kΩ2] ≤(U[v]-12v)I [mA]
傳動誤差 ≤0.5%
溫度影響 ≤0.1%/10K(≤0.1%/18°F)
分辨率 ≤0.1%
有效內部電容 C=近似為零
有效內部電感 L=近似為零