CORTEC 閥板防護油 VPCI-369 19L/桶
深圳前海眾合恒達科技有限公司/李小姐/ /QQ
PRODUCT DESCRIPTION
VpCI-369 is our best inhibitor for use as an oil additive and/
or temporary coating. The protective film is self-healing and
moisture-displacing, providing superior protection against
aggressive environments. VpCI-369 is also excellent when
used as an oil additive for mothballing, shipping, or storage
of parts and equipment. In small percentages, VpCI-369
has a minimal effect on viscosities.
VpCI-369 is available prediluted with mineral spirits at the
ratio 1:1 as VpCI-369 H, which is recommended for spray
can applications.
FEATURES
• Self-healing
• Excellent lubricity
• Extends tool life for metalworking operations
• Excellent outdoor protection
• Excellent oil additive
• Dilutable with oil
• Meets MIL-PRF-16173E (Grade 2)
• NSN
• NSN
• NSN
• NSN
TYPICAL APPLICATIONS
• Wire rope
• Electrical connections/wiring
• Sheltered coating
• Gear protectant/lubricant
• Long-term (5+ years) equipment lay-up
• Stamping oil additive
• Drawing oil additive
• Cylinders
• Working/moving parts
PROTECTION PROPERTIES
METALS PROTECTED
• Silver
• Cast Iron
• Stainless Steel
• Copper
• Magnesium
• Aluminum
• Carbon Steel
MINIMUM REQUIREMENTS FOR
SURFACE PREPARATION
NACE SSPC ARS
4 7-63 As low as B-3
Methods for Monitoring:
Wet Film Thickness Gauge
TYPICAL PROPERTIES
Appearance Light beige/tan viscous liquid
Film Type Oily
Flash Point 233˚F (112˚C)
Shelf Life 24 months @ 75˚F (24˚C)
Non-volatile Content 95-99%
Theoretical Spread Rate ft2/gal @ 1-2 mils
(18.8-37.6 m2/l @ 25-50
microns)
Viscosity cps
Weight per Gallon 7.7-8.4 lb/gal
(0.92-1.01 kg/l)
Temperature Resistance -108°F to 500°F
(Fully Cured) (-78°C to 260°C)
