HONSBERG INSTRUMENTS
深圳前海眾合恒達(dá)科技有限公司/李小姐/ /QQ
Flow Indicator/
Switch NJ / NJV
Scale for various viscosities or viscosity stabilised from 30
to 200 mm²/s
Also for dark or dirty media
Robust construction
Characteristics
Mechanical flow meter with spring-supported piston for fluid media.
The measured value is transferred to a display ring via a magnetic
coupling. Because of this separation, the display cannot become
dirty. Robust construction in brass or stainless steel.
Technical data
Switch optional reed switch
Nominal width DN 8..25
Process
connection
female thread G 1 / 4 ..G 1
(further process connections available on
request)
Display range 2..80 l/min
for details see
table "Ranges"
Q max. to 80 l/min
Tolerance ±8 % of the full scale value, minimum 1 l/min
Pressure
resistance
PN 100 bar
Media
temperature
-20..+100 °C
Ambient
temperature
-20..+70 °C
Media water (NJ only), oils
(aggressive media available on request)
Wiring
for options, see "Switch contact options"
Switching voltage
Switching current
Switch
performance
Protection class
Protection class
Electrical
connection
Materials
medium-contact
Brass construction:
CW614N nickelled,
CW614N, 1.4310,
hard ferrite, NBR
Stainless steel
construction only
with NJ: 1.4571,
1.4310, hard ferrite
PTFE-coated, FKM
Non-medium-
contact materials
Acrylic HS
Weight see table "Dimensions and weights"
Installation
location
Standard: Vertical inwards flow from below;
other installation positions are possible; the
installation position affects the switching
point and range.
Ranges
Details in the table correspond to horizontal inwards flow with
increasing flow rate.
Standard NJ
G Display range
l/min H 2 O
Q max.
recommended
Types
G 1 / 4 2 - 10 10 NJ-008G.010
G 3 / 8 20 NJ-010G.010
4 - 20 NJ-010G.020
G 1 / 2 2 - 10 40 NJ-015G.010
4 - 20 NJ-015G.020
10 - 40 NJ-015G.040
G 3 / 4 2 - 10 60 NJ-020G.010
4 - 20 NJ-020G.020
10 - 40 NJ-020G.040
G 1 2 - 10 80 NJ-025G.010
4 - 20 NJ-025G.020
10 - 40 NJ-025G.040
20 - 80 NJ-025G.080
Special ranges are available.
Multi-scale display ranges
1 20-45 75-120 mm 2 /s
2 - 10 0.6 - 8 0.2 - 7 0.1 - 4 l/min
4 - 20 2.0 - 19 1.0 - 17 0.5 - 15
10 - 40 7.0 - 38 6.0 - 37 4.0 - 36
20 - 80 19.0 - 73 17.0 - 68 13.0 - 63
Viscosity stabilised NJV
Viscosity compensated devices are measured in the factory as per
ISO VG100.
G Display range
l/min oil
30..200 mm²/s
Q max.
recommended
Types
G 1 / 4 2 - 10 10 NJV-008G.010
G 3 / 8 20 NJV-010G.010
4 - 20 NJV-010G.020
G 1 / 2 2 - 10 40 NJV-015G.010
4 - 20 NJV-015G.020
10 - 40 NJV-015G.040
G 3 / 4 2 - 10 60 NJV-020G.010
4 - 20 NJV-020G.020
10 - 40 NJV-020G.040
10 - 60 NJV-020G.080
G 1 2 - 10 80 NJV-025G.010
4 - 20 NJV-025G.020
10 - 40 NJV-025G.040
10 - 60 NJV-025G.080
Switching voltage max. 250 V AC
Switching current max. 0.5 A
Switch performance max. 10 VA
Protection class 2 - safety insulation
Ingress protection IP 65
Electrical
connection
DIN 43650-A plug
Non-medium-
contact materials
PA
Additional
weight
0.2 kg
