Provibtech 振動傳感器,TM0782A-K
聯(lián)系人： 李 小姐
公司：深圳前海眾合恒達(dá)科技有限公司
地址：深圳市前海深港合作區(qū)前灣一路1號A棟201室
電話：
QQ：
he TM0782A-K accelerometer kit consists of one
accelerometer and one 5 meter cable. This accelerometer
kit directly interfaces with ProvibTech’s signal conditioners:
DTM, TR transmitters, DM Dual Monitors and PT580
vibration switches to measure case vibration in acceleration
or velocity.
Specifications
Electrical
Sensitivity: 100mV/g, @ 25 o C, ±10%
Frequency Response: 0.5 - 10,000Hz (±3dB)
Acceleration Range: 50g
Isolation: Fully isolated
Electrical Noise: 0.0007g
Power Requirement: 2 - 10mA constant current
18 - 30VDC
Bias Voltage: 10 - 14VDC
Order Information
TM0782A-M
Accelerometer with mounting screw 1/4-28” to M6×1
TM0782A-E
Accelerometer with mounting screw 1/4-28” to 1/4-28”
TM0782A-K-M
Accelerometer kit includes:
TM0782A accelerometer
Mounting screw (1/4-28” to M6×1)
TM
TM0782A-K-E
Accelerometer kit includes:
TM0782A accelerometer
Mounting screw (1/4-28” to 1/4-28”)
TM
TM0782A-M-S
Accelerometer with mounting screw 1/4-28” to M6×1
Hazardous area approval
TM0782A-E-S
Accelerometer with mounting screw 1/4-28” to 1/4-28”
Hazardous area approval
TM0702-XX: Aluminum MIL connector with XX meters cable, 7mm diameter.
< 120 o C (250 o F)
TM0703-XX: Seal tight boot connector with XX meters cable, 7mm diameter.
< 120 o C (250 o F)
TM0704-XX: Stainless steel MIL connector with armored XX meters cable,
7mm diameter. < 150 o C (300 o F), Maximum Length is 10 meters.
TM0705-XX: Cornered MIL connector with armored XX meters cable, 7mm
diameter.
< 120 o C (250 o F), Maximum Length is 10 meters.
TM0710: Mounting screw 1/4-28” - M6×1
TM0711: Mounting screw 1/4-28” - 1/4-28”
TM0712: Mounting screw 1/4-28” - M8
TM0713: Mounting screw 1/4-28” - M10
