品牌：RETZ瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……

進口可設定時間段開關球閥功能介紹 Function introduction

可設定啟閉時間段獨立控制（比如開啟10分鐘，關閉60分鐘，一直循環）The opening and closing time can be set for independent control (such as opening for 10 minutes, closing for 60 minutes, and cycling all the time)

A、可設定開和關時間長短，不具有時鐘性質，閥門按照設定的時長周期循環執行開和關 The length of opening and closing time can be set, without clock nature, and the valve can be opened and closed according to the set long cycle

B、可設定：1分鐘~999小時59分和15秒~999分鐘59秒兩種時間范圍 Can be set: 1 minute to 999 hours and 59 minutes and 15 seconds to 999 minutes and 59 seconds

進口可設定時間段開關球閥控制接線圖 Control wiring diagram

1、在設定開的時間段，電動球閥打開 The electric ball valve opens within the set opening time

2、在設定關的時間段，電動球閥關閉 The electric ball valve is closed within the set closing time

適用于DC12V或DC24V球閥。時間段控制/可設定范圍：1分鐘~999小時59分和15秒~999分鐘59秒兩種時間范圍，球閥按照設定的時長周期循環執行開和關Applicable to DC12V or DC24V ball valve. Time period control/settable range: 1 minute to 999 hours and 59 minutes and 15 seconds to 999 minutes and 59 seconds. The ball valve is opened and closed according to the set long cycle

進口可設定時間段開關球閥基本參數 Basic parameters

規格尺寸Specification and size：1/2～2"

塑料球閥閥體為PPO或"UPVC"材料，金屬球閥閥體為316不銹鋼材質，采用浮動球直通結構 The plastic ball valve body is made of PPO or "UPVC" material, the metal ball valve body is made of 316 stainless steel, and the floating ball straight-through structure is adopted

塑料閥體：工作溫度0-60℃，工作壓力0-1MPa，EPDM和FFKM橡膠密封材質可選 Plastic valve body: working temperature 0-60 ℃, working pressure 0-1MPa, EPDM and FFKM rubber sealing materials optional

金屬閥體：工作溫度0~120℃、工作壓力0~1.6MPa，EPDM和FFKM橡膠密封材質可選，其中FFKM橡膠密封材質工作溫度0-200℃  Metal valve body: working temperature 0~120 ℃, working pressure 0~1.6MPa, EPDM and FFKM rubber sealing materials are optional, of which the working temperature of FFKM rubber sealing material is 0-200 ℃

直流/交流減速電機（DC6-24V/AC220V）

316L閥桿（根據不同酸堿可選哈式合金鋼B或C）

不銹鋼316閥體，PPO閥體

陶瓷球芯（剛玉陶瓷氧化鋁）

PPS耐腐蝕密封片

瓷密封片

開關指示燈