品牌：RETZ瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……

進口電動切斷球閥(V型閥芯，O型閥芯）具有結構緊湊，切換迅速，流通能力大，閥座與端面法蘭距離近，物料滯留少，密封性能優良等特點

retz Imported electric cut-off ball valve (V-type valve core, O-type valve core) is characterized by compact structure, rapid switching, large flow capacity, close distance between valve seat and end flange, less material retention, and excellent sealing performance

功能介紹 Function introduction

進口電動切斷球閥(V型閥芯，O型閥芯）具有全通徑和縮徑兩種結構形式。用于輸送粘性、易結渣介質管道上使用全通徑的，方便定期的刮蠟吹掃器通過。進口電動切斷球閥2.jpg用于輸送氣體或物理性能近似于水的介質的管道上宜使用縮徑球閥，因其重量比全通徑的電動球閥輕30%左右，有利于減輕管道負荷retz The imported electric cut-off ball valve (V-type valve core, O-type valve core) has two structural forms of full bore and reduced bore. It is used for conveying viscous and slag-prone medium, and it is convenient for regular paraffin scraper and purging to pass through. The reduced-diameter ball valve should be used on the pipeline for transporting gas or medium with physical properties similar to water, because its weight is about 30% lighter than the full-diameter electric ball valve, which is beneficial to reducing the pipeline load

設計特色 Design features

采用全通徑或縮徑設計，流通阻力小 Full bore or reduced bore design, low flow resistance

采用高平臺結構，ISO5211連接標準，能使安裝電/氣動執行器更為專業化 High platform structure and ISO5211 connection standard can make the installation of electric/pneumatic actuators more professional

閥桿采用內裝式，軸肩及聚四氟乙烯（或增強石墨）推力墊結構防止閥桿因管道內壓力 而吹 出，同時聚四氟乙烯（或增強石墨）材料減小閥門的啟閉扭矩，使操作更為省力 The valve rod is internally mounted, with the shoulder and Teflon (or reinforced graphite) thrust pad structure to prevent the valve rod from blowing out due to the pressure in the pipe. At the same time, Teflon (or reinforced graphite) material reduces the opening and closing torque of the valve, making the operation more labor-saving

具有防火防靜電結構，在閥桿與閥體及閥桿與球體之間設置導電彈簧，避免因靜電打火點燃易燃介質 It has a fireproof and anti-static structure, and a conductive spring is set between the valve rod and the valve body and between the valve rod and the ball to avoid igniting flammable media due to static electricity

耐火結構雙重保護，當萬一發生火災而使密封圈燒損時，球閥的各個密封部位均能形成金屬對金屬的硬密封結構 The fire-resistant structure has double protection. When the sealing ring is burnt in case of fire, all sealing parts of the ball valve can form a metal-to-metal hard sealing structure

進口電動切斷球閥執行器技術參數 Technical parameters of actuator

電源電壓     AC220/380V，50/60Hz

輸出力矩     50N•M～2000N•M

動作范圍     0～90° 0～360°

動作時間     15秒/30秒/60秒

保護裝置     過熱保護

環境溫度     -30°～60°

手動操作     同附帶手柄操作

限位   電氣、機械二重限位

防護等級     相當于IP-65

防爆等級     ExdII BT4；特殊要求可定制ExdII BT6

位置測量     可選裝開關或電位計

驅動電機     8W/E

進線接口     PE1/2〞進線線鎖

主要技術參數及性能 Main technical parameters and performance

公稱通徑(mm)       15      20      25      32      40      50      65      80      100    125    150    200    250    300

流量系數Kv 21      38      72      112    170    273    384    512    940    1452   2222   3589   5128   7359

公稱壓力(MPa)      PN1.6、2.5、4.0、6.4MPa

泄漏量         軟密封：零泄漏；硬密封：≤額定流量的10-5

閥體形式     兩段式閥體(浮動球體)     兩段式閥體(固定球體)

閥芯形式     “O”型球形閥芯

密封填料     聚四氟乙烯(PTFE)、金屬石墨纏繞墊片

連接形式     法蘭、焊接、螺紋、對夾

流量特性     近似快開特性

可調范圍     DN15-65      DN80-300

250:1  350:1

基本誤差     ±1%

死區   ≤1%

回差   ≤1%

適用溫度     密封面

PTFE≤150℃ RTFE≤180℃ PPL≤300℃ 硬密封≤450℃

配置執行機構        角行程電動執行機構

控制方式     開關到位燈(開關兩位控制)、無源觸點信號、1/5K電位計、智能調節(4～20mA模擬量信號控制)

主要零件材料 Material of main parts

零件名稱     材料名稱

閥體   WCB  304(CF8)      316(CF8M)   316L(CF3M)

球體   2Cr13+氮化處理    304    316    316L

閥桿   2Cr13 304    316    316L

密封圈         聚四氟乙烯(PTFE)、增強聚四氟乙烯(PPL)、對位聚苯、柔性石墨

適用介質     水、氣體、蒸汽、油品等 硝酸等腐蝕性介質 醋酸等腐蝕介質     尿素等腐蝕性介質