品牌：RETZ瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……

功能介紹 Function introduction

進口電動偏心半球閥(調節型，切斷型）采用板簧加載的可動閥座結構，閥座與球體不會產生卡阻或脫離等問題，密封可靠，使用壽命長。電動偏心半球閥切口的球芯與金屬閥座之間具有剪切作用，特別適用于含纖維、微小固體顆粒及料漿等介質 retz The imported electric eccentric hemispherical valve (regulating type, cut-off type) adopts the moveable valve seat structure loaded with leaf spring. The valve seat and the ball will not be stuck or separated, and the sealing is reliable and the service life is long. There is a shearing action between the ball core of the V-notch of the electric eccentric hemisphere valve and the metal valve seat, which is especially suitable for media containing fiber, small solid particles and slurry

設計特色 Design features

1、解決了工業生產中的漿狀、混流液體、灰塵等介質在管道輸送中沉淀、易結垢、阻塞，使閥門關不嚴等問題 Solved the problems of slurry, mixed flow liquid, dust and other media in industrial production, such as sedimentation, scaling and blocking in pipeline transportation, and making the valve not closed tightly

2、開關輕便，開啟時球與殼體脫離，無任何接觸，啟動扭矩小，轉動靈活。關閉時，半球與閥座的擠切作用能除去密封面上的污物，使閥門順利啟閉，安全系數高，密封性能好 The switch is light, the ball is separated from the shell during opening without any contact, the starting torque is small, and the rotation is flexible. When the valve is closed, the squeezing and cutting action of the hemisphere and the valve seat can remove the dirt on the sealing surface, so that the valve can be opened and closed smoothly, with high safety factor and good sealing performance

3、密封面的偏心結構，使球面能自動補償磨損，能保持閥門的密封，使用壽命長 The eccentric structure of the sealing surface enables the spherical surface to automatically compensate for wear, maintain the sealing of the valve, and have a long service life

4、耐磨硬密封偏心半球閥，它的密封副材料是特殊的，密封面要經過特殊耐磨處理。處理后表面硬度可達到HRC65-72度，故閥門的耐磨性能特別好 Wear-resistant hard seal eccentric hemisphere valve, its sealing pair material is special, and the sealing surface shall undergo special wear-resistant treatment. The surface hardness after treatment can reach HRC65-72 degrees, so the wear resistance of the valve is particularly good

進口電動偏心半球閥主要零件材料 Material of main parts

零件名稱   材料

閥體、閥蓋 WCB   304(CF8)   316(CF8M)  316L(CF3M)

球體  2Cr13+氮化處理   304   316   316L

閥桿  2Cr13 304   316   316L

閥座密封圈 PTFE、碳素纖維＋PTFE、對位聚苯、金屬密封

密封填料   V型聚四氟乙烯填料、含浸聚四氟乙烯石棉填料、石棉紡織填料、石墨填料

技術性能 Main technical parameters and performance

公稱通徑 DN(mm)  25    32    40    50    65    80    100   125   150   200   250   300

額定流

量系數

KV    全腔型     14    25    30    55    100   135   230   320   500   850   1300  1750

60%腔型    -     -     -     -     -     -     -     -     300   510   780   1050

40%腔型    6     10    12    20    40    54    92    128   200   340   520   700

允許壓差(MPa)    ≤公稱壓力

閥體形式   整體鑄造球形體

閥芯形式   偏心旋轉閥芯(帶導流翼)

流量特性   近似等百分比

動作范圍   全開60°

泄露量Q    軟密封VI級、硬密封IV級，符合ANSI B16.104標準

基本誤差   ±1%

回差  ±1%

死區  ≤1%

可調范圍   全腔型(100：1)、60%腔型(60：1)、40%腔型(40：1)

配置執行機構     角行程電動執行機構

控制方式   開關到位燈(開關兩位控制)、無源觸點信號、1/5K電位計、智能調節(4～20mA模擬量信號控制)

進口電動偏心半球閥執行器參數 Technical parameters of actuator

電源電壓   AC220/380V，50/60Hz

輸出力矩   HR：50N•M～2000N•M；HQ：50N•M～3000N•M

動作范圍   0～90° 0～360°

動作時間   15秒/30秒/60秒

保護裝置   過熱保護

環境溫度   -30°～60°

手動操作   同附件帶手柄、手輪

限位  電氣、機械二重限位

防護等級   相當于IP-65

防爆等級   ExdII BT4；特殊要求可定制ExdII BT6

位置測量   可選裝開關或電位計

驅動電機   8W/E

進線接口   PE1/2〞進線線鎖