在 PVC 擠出低發泡制品中添加發泡調節劑，能促進 PVC 的凝膠化，提高熔體的熱強度及延伸性；改善制品的表面質量；使發泡劑形成的細微泡孔穩定，不使泡孔壁破裂而相互穿透而形成大孔，故所得的泡沫不僅密度小而且強度好。
Adding foaming regulators to low-foaming PVC extruded products can promote the gelation of PVC, enhance the thermal strength and ductility of the melt. Improve the surface quality of the products; The fine cells formed by the foaming agent are stabilized, preventing the cell walls from breaking and penetrating each other to form large cells. Therefore, the resulting foam not only has a low density but also good strength.
產品性能
Product performance
一是為了促進PVC的塑化;
One is to promote the plasticization of PVC;
二是為了提高PVC發泡物料的熔體強度，防止氣泡的合并，以得到均勻發泡的制品;
Secondly, it is to enhance the melt strength of PVC foaming materials, prevent the merging of bubbles, and obtain uniformly foamed products.
三是為了保證熔體具有良好的流動性，以得到外觀良好的制品。
Thirdly, it is to ensure that the melt has good fluidity, so as to obtain products with good appearance.
產品特征
Product feature
適用于擠出工藝
It is applicable to extrusion processes
白色流動粉末
White flowing powder
表觀密度g/m³ ≥0.35
The apparent density ≥0.35 g/m³
揮發份 % ≤1
The percentage of volatile matter is ≤1
特性粘度 ≥≥11.2
The characteristic viscosity is ≥≥11.2
應用
Application
產品主要用于木塑&發泡材料制品如:PVC木塑發泡型材、板材、木塑模板、發泡型材、發泡板材等硬制品。
The products are mainly used in wood-plastic and foamed material products such as PVC wood-plastic foamed profiles, boards, wood-plastic formwork, foamed profiles, foamed boards and other hard products.
包裝
Packaging
25kg/袋。
25kg per bag
特別提醒
Special reminder
1、存放在陰涼、干燥的庫房，切忌雨淋、受潮。存放時必須遠離火源和熱源，避免暴曬，嚴禁與酸堿直接接觸或混放。
1.Store in a cool and dry warehouse, and avoid rain and moisture. When storing, it must be kept away from fire and heat sources, avoid direct sunlight, and strictly prohibit direct contact or mixed storage with acids and alkalis.
2、因工藝條件及環境不同，發泡情況可能有差異，故而使用前請先試一手小料。
2.Due to different process conditions and environments, the foaming situation may vary. Therefore, please test a small amount of material before use.
3、本文所刊載的都是我們測定的可靠數據。不過，使用者必須自行決定產品的適用性。由于公司無從對所有狀況與對象一概明了，所以不能保證產品在特定用法與用途上的正確性與適用性。閣下在使用產品之前，應先作徹底的驗證。
3.All the data published in this article are reliable ones we have measured. However, users must determine the applicability of the product by themselves. As the company cannot have a clear understanding of all situations and objects, it cannot guarantee the correctness and applicability of the product in specific uses and applications. Before using the product, you should conduct a thorough verification first.
